35% Oil Modified Urethane Sanding Sealer (Low VOC)

A low VOC, fast drying, solventborne coating formulated to penetrate and seal
interior bare wood surfaces before finishing. This product contains no stearates
making it suitable for use under oil modified urethanes as well as a variety of
other finishes. Dries to a clear film that does not obscure the wood grain.
Typically dry for sanding in 4 hours. Additional coats may be applied if desired
or on very porous woods that may not be completely sealed in one coat.

PHYSICAL:
Viscosity: 24-34 seconds (#1 Zahn Cup)
Weight/Gallon: 8.3 +/- 0.25 lbs./gallon
Gloss: 85% minimum
Weight Solids: 30% +/- 2.0
Volume Solids: 28% +/- 2.0
VOC(calculated): Less than 350 grams/liter, Less than 2.9 lbs./gallon
Flash Point: (Setaflash) 57%

APPLICATION:
Viscosity: As is
Reduction: Apply without thinning
Reducer: None
Application Method: Lambs Wool, T-Bar, Spray
Clean Up: Mineral Spirits
Coverage (sq. ft./gallon): 600-800 on porous surface
Wet Film Thickness: 2.0-2.7 mils
Dry Film Thickness: 0.5-0.8 mils
Dry to Touch: 1 Hour
Dry to Recoat/Topcoat: 4 Hours
Dry Hard: 18-24 Hours